Download the app
  • 6KV High Voltage Power Capacitor Single Phase With SS Case
6KV High Voltage Power Capacitor Single Phase With SS Case
discuss personally
Model
BAM-6.3kV
Basic info Product Detail Supplier
Basic info
Brand ROCKWILL
Model NO. 6KV High Voltage Power Capacitor Single Phase With SS Case
Rated voltage 6.3kV
Rated frequency 50/60Hz
Series BAM
Product Detail

Overview of Stainless Steel 6.3KV 1 Phase 150 kVar Power High Voltage Capacitor Bank

The high voltage shunt capacitor is composed of a pack, a case, an outlet porcelain busing, etc. The two sides of stainless steel case are welded with hanging brackets for installation, and one hanging bracket is equipped with a grounding bolt. In order to adapt to various voltages, the pack is composed of several small elements connected in parallel and series. The capacitor is equipped with a discharge resistor.

 Function of Stainless Steel 6.3KV 1 Phase 150 kVar Power High Voltage Capacitor Bank

High voltage shunt capacitor/High voltage shunt capacitor are suitable for 50Hz or 60Hz AC power systems to improve the power factor of the power system, reduce line losses, improve the quality of the power supply voltage, and increase the active output of the transformer.    

The Shunt Capacitor is suitable for the power system of power frequency (50 or 60Hz) , to increase the power factor , reduce line loss , improve voltage quality .

When capcitor bank put into use , the ambient temperature shall not be lower than -50℃, and sverage temperature not exceeding +55℃, not exceed +20℃ per a year . if out of this range , fan shall be used to cool or switch off the capacitor bank.

parameters

Rated voltage

6.3kV

Rated frequency

50Hz；60Hz

Rated Capacity

150kvar

Application

Hight Voltage

Protection method

Internal fuse or external fuse

Number of phases

Single-phase

Capacitance deviation

-3%～+5%

Package

Export wooden packing

Loss tangent value (tanδ)

≤0.0002

Discharge resistance

The capacitor is equipped with a discharging resistor. After being disconnected from the grid, the voltage on the terminal can drop below 50V within 5 minutes

 Main features of Stainless Steel 6.3KV 1 Phase 150 Kvar Power High Voltage Capacitor Bank

  • Casing: Cold-pressed, anti-fouling type casing is adopted, and the creepage distance is not less than 31mm/kV.

  • Mature internal fuse technology.

  • After testing, the internal fuse can isolate the faulty component within 0.2ms, the release energy of the fault point is not more than 0.3kJ, and the remaining intact components are not affected.

  • Advanced concealed internal fuse structure, using oil gap arc extinguishing, reducing the possibility of blasting the capacitor case.

  • The internal fuse protection and relay protection have perfect coordination standards to ensure the safe and reliable operation of the entire device.

  • Liquid medium: 100% insulation oil (NO PCB) is used. This liquid has excellent low temperature performance and partial discharge performance.

Applicable standard of Stainless Steel 6.3KV 1 Phase 150 Kvar Power High Voltage Capacitor Bank

  • IEC60871 and equivalent standard

Conditions of Operation

  • Location: indoor or outdoor

  • Ambient temperature:-40℃~+45℃(Freezing field can meet -45℃)

  • Wind load:not exceed 35m/s

  • Altitude:not exceed 2000m

  • lcing thickness:not exceed 10mm

  • Seismic strendth:8

  • Pollution level:ⅢorⅣ

  • For special requirements,please specified in the contract

Know your supplier
ROCKWILL
Rockwill Electric Group Global Manufacturer of High voltage and medium-voltage power equipment and smart grid solutions. Headquartered in Wenzhou, China. Serving 100+ countries with quality, innovation, and trust. What We Offer: • HV-MV switchgear (VCB, SF₆ circuit breakers, RMU, GIS) • Distribution transformers and substations • Smart grid and monitoring systems • Solar, wind, EV charging, and energy storage solutions • EPC turnkey power projects Certified: ISO 9001 / ISO 14001 / ISO 45001
Main Categories
High Voltage Electrical Apparatus
Business Type
Design/Manufacture/Sales
Highest Annual Export (USD)
$150,000,000
Professional Experience
16 years
Workplace
108000m²m²
占位
占位
Related Products
More
Related Knowledges
More
Analysis of Abnormal Causes of High-Voltage Cable Grounding Circulation and Typical Cases
Analysis of Abnormal Causes of High-Voltage Cable Grounding Circulation and Typical Cases
I. Introduction to Cable Grounding Loop CurrentCables rated 110 kV and above use a single-core structure. The alternating magnetic field generated by the operating current induces a voltage on the metallic sheath. If the sheath forms a closed circuit through the earth, a grounding loop current will flow on the metallic sheath. Excessive grounding loop current (loop current exceeding 50 A, more than 20% of the load current, or a ratio of maximum-to-minimum phase current greater than 3) not only a
Felix Spark
09/03/2025
Considerations and Recommendations for Flame-Retardant Selection of High-Voltage Cables
Considerations and Recommendations for Flame-Retardant Selection of High-Voltage Cables
1.Flame-Retardant Cable Classification StandardsThe flame-retardant standard system is divided into two main categories. The first category follows the "Classification of Burning Behavior for Electric and Optical Fiber Cables" GB 31247. Cables complying with this standard system are widely used in densely populated areas such as high-speed railways and subways. This standard imposes strict requirements on parameters such as smoke density, heat release, and total smoke production, and cables typi
James
09/03/2025
Repair of high-voltage cable metallic sheaths
Repair of high-voltage cable metallic sheaths
I. Functions of Metallic Sheaths and Necessity of RepairThe metallic sheath of high-voltage cables is a metal shielding structure laid outside the insulation layer, including types such as lead sheaths, aluminum sheaths, and steel wire armor. Its core functions include mechanical protection (resisting external impact and compression), electrochemical corrosion protection (isolating moisture and soil pollutants), electromagnetic shielding (reducing electromagnetic interference to the environment)
Felix Spark
09/03/2025
What factors need to be considered when designing a transformer?
What factors need to be considered when designing a transformer?
Transformer design is a complex process that requires consideration of multiple factors to ensure safe and efficient operation. In addition, compliance with international and local regulations is essential to guarantee that transformers meet safety and performance standards. Below are key factors to consider in transformer design and the relevant regulations to follow:Transformer Design Factors: Voltage and Frequency: Determine the input and output voltage levels and the operating frequency. The
Vziman
09/02/2025
What failure modes are possible in a transformer? How to identify and fix these failures?
What failure modes are possible in a transformer? How to identify and fix these failures?
Transformers are critical components in power systems, and various failure modes can affect their operation. Timely identification and resolution of these failure modes are essential to prevent costly downtime and ensure system reliability. Below are some common transformer failure modes, along with methods to identify and address them: Insulation FailureIdentification: Insulation failure leads to decreased insulation resistance, which can be detected through insulation resistance testing (megge
Edwiin
09/02/2025
A hybrid DC circuit breaker
A hybrid DC circuit breaker
Most DC molded-case circuit breakers use natural air arc extinction, and there are typically two arc extinguishing methods: one is conventional opening and closing, where the contacts axially stretch the arc, while the conductive circuit generates a magnetic field that bends and elongates the arc, pulling it lengthwise perpendicular to the arc axis. This not only increases the arc length but also induces lateral motion, enabling air cooling to achieve arc extinction.The other method involves the
Echo
09/02/2025
×
Inquiry
Download
IEE-Business is dedicated to serving the personnel in the global power industry.
Join IEE-Business, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!
App Store App Store App Store App Store App Store App Store App Store App Store
App Store